CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] need torque formula help

Posted by chuck
on 2011-11-20 09:15:39 UTC
Right, and the fulrum actually moves as the hammer,crowbar rotate on curve.
Sent via my "ChuckBerry" by AT&T

-----Original Message-----
From: Roland Jollivet <Roland.Jollivet@...>
Sender: CAD_CAM_EDM_DRO@yahoogroups.com
Date: Sun, 20 Nov 2011 19:10:49
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Reply-To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] need torque formula help

See the operation in a straight line, like weights on a see-saw. Don't be
confused be the right angle at the fulcrum (point of pivot).

Regards
Roland



On 20 November 2011 18:09, turbulatordude <dave_mucha@...> wrote:

> **
>
>
> Hi all,
>
> looking for the formula, not the answer so much.
>
> if you have a hammer to pull a nail, the claw is, say, 1 inch from the
> nail.
>
> if you use a crowbar, the claw is 3 inches.
>
> The handle is 1 foot in both cases.
>
> What I am trying to determine is the pulling action at the nail.
>
> what has me stumped is that the simple formula, F=weight x distance does
> not offer the offset.
>
> can I just use the hypotenuse to calculate force ?
>
> Thanks!
>
> Dave
>
>
>


[Non-text portions of this message have been removed]



------------------------------------

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner

Yahoo! Groups Links

Discussion Thread

turbulatordude 2011-11-20 08:09:22 UTC need torque formula help rwwink 2011-11-20 08:53:09 UTC RE: [CAD_CAM_EDM_DRO] need torque formula help Roland Jollivet 2011-11-20 09:11:23 UTC [CAD_CAM_EDM_DRO] need torque formula help chuck 2011-11-20 09:15:39 UTC Re: [CAD_CAM_EDM_DRO] need torque formula help turbulatordude 2011-11-20 09:43:11 UTC Re: need torque formula help