CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: aluminum Vee rails ?

Posted by Ron Thompson
on 2012-05-20 06:57:42 UTC
On 5/20/2012 8:30 AM, turbulatordude wrote:
> my concern is the roller contact points on the aluminum holding up
> over time. a small router may not have too much pressure, but over
> thousands or tens of thousands of cycles, will the aluminum retain
> it's shape and distance between centers ?
>
> Dave
Maybe you should consider the life of the machine you want to use it on.
If it's a prototype, this is probably fine. If the machine sees constant
use, the rails are consumable items and can be replaced or upgraded.
If you anticipate constant use, use better rails.

--


Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA

Think, Draw, Print. 3D printers ROCK!

http://www.plansandprojects.com/My%20Machines/PrusaMendel2012-1/

http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/

Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/

Discussion Thread

turbulatordude 2012-05-18 18:07:44 UTC aluminum Vee rails ? Tony Smith 2012-05-19 09:06:48 UTC RE: [CAD_CAM_EDM_DRO] aluminum Vee rails ? David G. LeVine 2012-05-19 09:45:00 UTC Re: [CAD_CAM_EDM_DRO] aluminum Vee rails ? turbulatordude 2012-05-19 12:15:01 UTC Re: aluminum Vee rails ? Tony Smith 2012-05-19 14:16:06 UTC RE: [CAD_CAM_EDM_DRO] Re: aluminum Vee rails ? Roland Jollivet 2012-05-19 23:08:27 UTC [CAD_CAM_EDM_DRO] Re: aluminum Vee rails ? Tony Smith 2012-05-20 00:30:17 UTC RE: [CAD_CAM_EDM_DRO] Re: aluminum Vee rails ? turbulatordude 2012-05-20 05:30:53 UTC Re: aluminum Vee rails ? Ron Thompson 2012-05-20 06:57:42 UTC Re: [CAD_CAM_EDM_DRO] Re: aluminum Vee rails ? David G. LeVine 2012-05-20 07:55:02 UTC Re: [CAD_CAM_EDM_DRO] Re: aluminum Vee rails ? turbulatordude 2012-05-20 07:55:55 UTC Re: aluminum Vee rails ? Tony Smith 2012-05-20 08:15:58 UTC RE: [CAD_CAM_EDM_DRO] Re: aluminum Vee rails ? Tony Smith 2012-05-20 08:17:55 UTC RE: [CAD_CAM_EDM_DRO] Re: aluminum Vee rails ? John Jackson 2012-05-20 13:29:56 UTC Re: aluminum Vee rails ?