Re: Dan Mauch 3 axis chopper
Posted by
proto_trains
on 2012-07-21 06:57:59 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Randy Gordon-Gilmore <randy@...> wrote:
http://www.angelfire.com/ego/stevenmanzer/CNC_Hardware.html
which is the page the photo is on. The photo is a little larger than displayed on the page, so if you save it or open it in its own tab you'll see it full size.
Randy
> http://www.angelfire.com/ego/stevenmanzer/photos/CamtronicsController.jpgOops, angelfire doesn't like hotlinking. Go to
http://www.angelfire.com/ego/stevenmanzer/CNC_Hardware.html
which is the page the photo is on. The photo is a little larger than displayed on the page, so if you save it or open it in its own tab you'll see it full size.
Randy
Discussion Thread
ebiz_59
2012-07-18 18:09:34 UTC
Dan Mauch 3 axis chopper
Randy Gordon-Gilmore
2012-07-19 20:25:30 UTC
Re: Dan Mauch 3 axis chopper
Randy Gordon-Gilmore
2012-07-21 06:34:39 UTC
Re: Dan Mauch 3 axis chopper
proto_trains
2012-07-21 06:57:59 UTC
Re: Dan Mauch 3 axis chopper
Andy Wander
2012-07-21 08:38:13 UTC
RE: [CAD_CAM_EDM_DRO] Re: Dan Mauch 3 axis chopper
Dan Mauch
2012-07-21 09:05:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: Dan Mauch 3 axis chopper
chuck merja
2012-07-21 14:09:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dan Mauch 3 axis chopper