CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Dan Mauch 3 axis chopper

Posted by Andy Wander
on 2012-07-21 08:38:13 UTC
Why not just ask Dan?

http://www.camtronics-cnc.com/

Andy Wander

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Randy Gordon-Gilmore
Sent: Friday, July 20, 2012 11:09 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Dan Mauch 3 axis chopper

Chuck, I checked back through all my backup disks (earliest is 2002
era) but was not able to find any Camtronics information. I had (it
turns out) sold my board by then.

There are two pictures of the Camtronics board online:

http://www.angelfire.com/ego/stevenmanzer/photos/CamtronicsController.jpg

http://www.cnczone.com/forums/attachment.php?attachmentid=14832&d=1140313297

and the L298 datasheet from STMicroelectronics (ironically their US
sales office is about 3 miles from my house) has a reference circuit
and PCB layout. Available probably most easily here:

http://www.sparkfun.com/datasheets/Robotics/L298_H_Bridge.pdf

I hope that may help you some.

Randy
--
Randy Gordon-Gilmore
http://www.prototrains.com
randy@...



------------------------------------

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner

Yahoo! Groups Links

Discussion Thread

ebiz_59 2012-07-18 18:09:34 UTC Dan Mauch 3 axis chopper Randy Gordon-Gilmore 2012-07-19 20:25:30 UTC Re: Dan Mauch 3 axis chopper Randy Gordon-Gilmore 2012-07-21 06:34:39 UTC Re: Dan Mauch 3 axis chopper proto_trains 2012-07-21 06:57:59 UTC Re: Dan Mauch 3 axis chopper Andy Wander 2012-07-21 08:38:13 UTC RE: [CAD_CAM_EDM_DRO] Re: Dan Mauch 3 axis chopper Dan Mauch 2012-07-21 09:05:28 UTC RE: [CAD_CAM_EDM_DRO] Re: Dan Mauch 3 axis chopper chuck merja 2012-07-21 14:09:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Dan Mauch 3 axis chopper