Re: [CAD_CAM_EDM_DRO] Re: Lost steps

In a message dated 08/22/2000 10:33:10 AM Hawaiian Standard Time,
jmelson@... writes:

<< OK, what Peter is talking about here is putting small value capacitors
across the signal inputs (one from signal ground to step in, and one
from signal ground to direction in) right at the stepper driver
terminals.
I would recommend 100 pF (Pico Farads) as a start. This will remove
extremely short duration noise pulses that are picked up by the wiring.

Jon >>
Thanks Jon E.,

Nice to have back up when one lacks expertise in certain details.

Peter
THRD, Inc.