Re: [CAD_CAM_EDM_DRO] Disappointed Lathe CNC

wanliker@... wrote:

> I was disappointed, I thought many others would have questions and interest
> in CNC for lathes, but I do encourage those that answered to fill the pages.
> I need to learn....grin
> bill

So do I but it is down my list a ways from getting cnc on the mill. I'm thinking about the MSC/Thompson 1" ball screws for both
axis on a Jet 1340. BTW just converted the drive from the dual A belts to a 6 groove poly-V with 3.0 and 6.0" dia.
pulleys or sheaves which ever one is correct in this case. Transfers power quite nicely and I may have lost some vibration. Also
planning to cast a cu. yd or so of concrete as a base to mount the beast on.

Dave

>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager