Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Posted by
mgrady
on 2000-09-03 20:38:34 UTC
after looking at one would need a BIG fork truck
everything I have seen says about 7500 lb.
the guys that have the one I am looking at
used a sling around both ends of the ram to pick it up
they said it balanced nicely
In my area we have a bunch of mobil crane services
they are cheaper and usually more experienced
than using a wrecker service
mike
everything I have seen says about 7500 lb.
the guys that have the one I am looking at
used a sling around both ends of the ram to pick it up
they said it balanced nicely
In my area we have a bunch of mobil crane services
they are cheaper and usually more experienced
than using a wrecker service
mike
Discussion Thread
Carey L. Culpepper
2000-09-03 19:02:45 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
ptengin@a...
2000-09-03 19:28:37 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
mgrady
2000-09-03 20:11:56 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Tim Goldstein
2000-09-03 20:21:23 UTC
RE: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
dave engvall
2000-09-03 20:37:34 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
mgrady
2000-09-03 20:38:34 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Darrell
2000-09-03 21:07:17 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
mgrady
2000-09-03 21:19:10 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Jon Anderson
2000-09-03 22:59:22 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Jon Anderson
2000-09-03 23:04:50 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Jon Elson
2000-09-04 00:06:59 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Jon Elson
2000-09-04 00:12:08 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Jon Elson
2000-09-04 00:16:07 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
ptengin@a...
2000-09-04 01:51:23 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Ian Wright
2000-09-04 11:52:01 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Darrell
2000-09-04 18:37:26 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Darrell
2000-09-04 18:44:18 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay
Jon Elson
2000-09-04 22:42:03 UTC
Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay