Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay

NO, these are three axis machines with Z on the knee and the added function
of the Spindle Wizard on the quill. Originally it was used for drilling and
even peck drilling if you could get every thing set right.
Darrell AL7DO
http://www.machinemaster.com

----- Original Message -----
From: "Jon Elson" <jmelson@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Monday, September 04, 2000 12:17 AM
Subject: Re: [CAD_CAM_EDM_DRO] Heads up, CNC mill going cheap on ebay


>
>
>
> mgrady wrote:
>
> > I went and looked at a series 2 nc the other day
> > man it is a bunch of IRON!!!
> > can anything usable be salvaged from the control (maybe the power
> > supp?? )
> >
> > there is also one
> > in east,alton ILL at $810 on ebay right now a lot greasier looking tho
> > at
> > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=423219345
> >
>
> I think this one has been up on eBay before. I think this one has a
> 'Spindle Wizard',
> which is actually a turret stop for the spindle. If so equipped, that
> is a 2-axis
> machine with a manual spindle. I think the one that went earlier was a
> 3-axis
> machine.
>
> Jon
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>