Re: DRO BOARDS ARE IN

Tom,

What is the URL for your site?? I can't seem to find the bookmark I had.


Tim
[Denver, CO]

> -----Original Message-----
> From: Tom Kulaga [mailto:tkulaga@...]
> Sent: Tuesday, June 29, 1999 9:59 PM
> To: CAD_CAM_EDM_DRO@onelist.com
> Subject: Re: [CAD_CAM_EDM_DRO] DRO BOARDS ARE IN
>
>
> From: Tom Kulaga <tkulaga@...>
>
> > Date: Mon, 28 Jun 1999 06:37:20 -0700
> > From: "Dan Mauch" <dmauch@...>
> >Subject: Re: DRO BOARDS ARE IN
> >
> >I received the DRO boards on schedule and have assembled one to
> make ensure
> >there were no hidden problems. I connected it as a two axis board then I
> >added the other chip and ran it as a 4 axis board. The board worked great
> >with both the 1000 line rotary encoder and the 360 line linear
> encoder strip
> >from US digital. I check it in one inch against a dial indicator and
> >everything was right on the money. For those that use metric,
> Tom's program
> >works fine in the metric mode.
> >The fourth axis is is degrees minutes and seconds.
> >I am very pleased with the with these boards and you need to thank Tom
> >Kulaga who wrote the program and came up with the concept.
> >I had some extra boards make solet me know if you're intereested..
> >I will write up the documentation for assembly today. For those that have
> >all ready ordered boards I have contacted you by email.
>
> For anyone who hasn't said it already, I want to say thanks to Dan
> for putting this deal together. It's a big savings in cost, time,
> and headaches to have an etched board to work with. It's beyond my
> skills to have set this one up.
>
> As far as the software goes, Dan's working with the latest version,
> which hasn't been posted on the webpage yet. I'm trying to get a
> full rewrite of the site done, and finally add those tutorials I've
> been meaning to do. This project has been running at maybe 25% the
> rate I'd hoped to move, so apologies to anyone who's been waiting on
> me. Tell ya what, if you've been put out, send me an email and I'll
> refund 150% of what you spent on the software and advice. ;)
>
> One more thing: I remember seeing a post by someone who had some
> rotary encoders he was graciously giving away. Is that person still
> here, and does he have any more left?
>
> -Tom Kulaga
>
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Campaign 2000 is here!
> http://www.onelist.com
> Discuss your thoughts; get informed at ONElist. See our homepage.
>
> ------------------------------------------------------------------------
> Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for
> the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> bill,
> List Manager
>