Re: [CAD_CAM_EDM_DRO] Re: Series II big stepper details and step mode
Posted by
Darrell
on 2000-10-09 17:25:48 UTC
The connections in the pics show this to be a Sigma motor.
The Superior motors are wired differently.
Darrell
The Superior motors are wired differently.
Darrell
> "Darrell" <dgehlsen@...> wrote:as
> These are 8 wire motors that Bridgeport has jumped to run
> 6 wire in unipolar mode. You can run these in bipolar bycan
> using 1 and 6 with 2 and 8 as the simplest wiring or you
> jump 1 to 5, 3 to 6, 4 to 8 and 2 to seven for paralleldetails
> bipolar or you can leave the jumpers on 5 to 6 and 7 to 8,
> take the white/blue and white/yellow wires off and run
> series connected bipolar.
> There has been lots of discussion on the benefits of each
> mode.
> Darrell
> > > > From: "Lee & Chris studley" <indigo_red@u...>
> > > > To: <CAD_CAM_EDM_DRO@egroups.com>
> > > > Sent: Saturday, October 07, 2000 8:40 PM
> > > > Subject: [CAD_CAM_EDM_DRO] Series II big stepper
> > &the
> > > > picts so far...
> > > >
> > > >
> > > > > Tim,
> > > > > Here's some detailed pictures of the steppers on
> > > > SERIES II mills:
> > > > >
> > > > > http://www.users.qwest.net/~indigo_red/files/
> > > > >
Discussion Thread
Carey L. Culpepper
2000-10-07 20:12:24 UTC
HEAVY metal
Tim Goldstein
2000-10-07 20:23:22 UTC
RE: [CAD_CAM_EDM_DRO] HEAVY metal
Lee & Chris studley
2000-10-07 20:38:55 UTC
Series II big stepper details & picts so far...
Darrell
2000-10-08 11:11:59 UTC
Re: [CAD_CAM_EDM_DRO] Series II big stepper details & picts so far...
cnc4me@u...
2000-10-09 09:07:24 UTC
Re: Series II big stepper details and step mode
Darrell
2000-10-09 09:30:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series II big stepper details and step mode
Jon Elson
2000-10-09 09:56:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series II big stepper details and step mode
cnc4me@u...
2000-10-09 15:23:49 UTC
Re: Series II big stepper details and step mode
Darrell
2000-10-09 17:25:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series II big stepper details and step mode
Lee Studley
2000-10-09 17:58:07 UTC
Re: Series II big stepper details and step mode
Darrell
2000-10-10 08:53:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Series II big stepper details and step mode