Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Posted by
Anne Ogborn
on 2000-10-10 19:17:10 UTC
Uh, I've used the method of putting a piece of drill rod of
appropriate size in the spindle, laying the part loose on the bed,
bringing the spindle down into the hole, then clamping the part
to the bed. Is this OK practice? (Annie's no machinist).
appropriate size in the spindle, laying the part loose on the bed,
bringing the spindle down into the hole, then clamping the part
to the bed. Is this OK practice? (Annie's no machinist).
Discussion Thread
ballendo@y...
2000-10-09 19:35:49 UTC
Locating already drilled holes
Ian Wright
2000-10-10 02:30:18 UTC
Re: [CAD_CAM_EDM_DRO] Locating already drilled holes
Alan Marconett KM6VV
2000-10-10 12:05:58 UTC
Re: [CAD_CAM_EDM_DRO] Locating already drilled holes
Terry Ackland
2000-10-10 15:32:11 UTC
Re: Locating already drilled holes
cnc4me@u...
2000-10-10 17:27:26 UTC
Re: Locating already drilled holes
dave engvall
2000-10-10 18:05:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
ballendo@y...
2000-10-10 18:35:29 UTC
Re: Locating already drilled holes
ballendo@y...
2000-10-10 19:02:48 UTC
Re: Re: Locating already drilled holes
Anne Ogborn
2000-10-10 19:17:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
ballendo@y...
2000-10-10 19:34:24 UTC
Re: Re: Locating already drilled holes
Jon Anderson
2000-10-10 19:50:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Alison & Jim Gregg
2000-10-10 19:58:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
dave engvall
2000-10-10 20:05:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Locating already drilled holes
Ian Wright
2000-10-11 03:23:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
ptengin@a...
2000-10-11 03:39:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
James Owens
2000-10-11 08:59:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Jon Elson
2000-10-11 12:27:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Anne Ogborn
2000-10-11 13:30:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Hugh Currin
2000-10-11 14:04:29 UTC
Re: Locating already drilled holes
Joe Vicars
2000-10-11 14:17:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Tim Goldstein
2000-10-11 14:20:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
wanliker@a...
2000-10-11 15:29:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Jerry Kimberlin
2000-10-11 15:30:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Jon Elson
2000-10-11 15:30:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
paul@a...
2000-10-11 15:36:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Alan Marconett KM6VV
2000-10-11 15:59:56 UTC
Re: Locating already drilled holes
Jerry Kimberlin
2000-10-11 16:12:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Terry Ackland
2000-10-11 17:48:19 UTC
Re: Locating already drilled holes
Anne Ogborn
2000-10-11 22:28:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
ballendo@y...
2000-10-11 22:59:25 UTC
Re: Re: Locating already drilled holes
Ron Ginger
2000-10-12 06:27:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes
Peter Chen
2000-10-13 15:33:00 UTC
Re: Locating already drilled holes
Alan Marconett KM6VV
2000-10-13 19:33:55 UTC
Re: Locating already drilled holes