CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes

Posted by wanliker@a...
on 2000-10-11 15:29:54 UTC
In a message dated 10/11/00 3:25:30 PM Mountain Daylight Time,
currinh@... writes:

<< I have had for a long time what is called a Co-Axial Indicator.
This mounts in the spindle of a mill and shows deviations from
center in both X and Y. >>

There are direction to build your own, in Guy Lautards Bed Side Reader # 3,
as well as many other hints/directions on aligning edges/holes.

I would highly recommend that anybody that is learning to machine, pick up
all three of his Bedside Readers. (What a title) But I do admit that I have
read myself asleep many times with them. And one time is not enough, you
will read them over and over.
bill

Discussion Thread

ballendo@y... 2000-10-09 19:35:49 UTC Locating already drilled holes Ian Wright 2000-10-10 02:30:18 UTC Re: [CAD_CAM_EDM_DRO] Locating already drilled holes Alan Marconett KM6VV 2000-10-10 12:05:58 UTC Re: [CAD_CAM_EDM_DRO] Locating already drilled holes Terry Ackland 2000-10-10 15:32:11 UTC Re: Locating already drilled holes cnc4me@u... 2000-10-10 17:27:26 UTC Re: Locating already drilled holes dave engvall 2000-10-10 18:05:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes ballendo@y... 2000-10-10 18:35:29 UTC Re: Locating already drilled holes ballendo@y... 2000-10-10 19:02:48 UTC Re: Re: Locating already drilled holes Anne Ogborn 2000-10-10 19:17:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes ballendo@y... 2000-10-10 19:34:24 UTC Re: Re: Locating already drilled holes Jon Anderson 2000-10-10 19:50:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Alison & Jim Gregg 2000-10-10 19:58:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes dave engvall 2000-10-10 20:05:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Locating already drilled holes Ian Wright 2000-10-11 03:23:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes ptengin@a... 2000-10-11 03:39:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes James Owens 2000-10-11 08:59:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Jon Elson 2000-10-11 12:27:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Anne Ogborn 2000-10-11 13:30:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Hugh Currin 2000-10-11 14:04:29 UTC Re: Locating already drilled holes Joe Vicars 2000-10-11 14:17:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Tim Goldstein 2000-10-11 14:20:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes wanliker@a... 2000-10-11 15:29:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Jerry Kimberlin 2000-10-11 15:30:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Jon Elson 2000-10-11 15:30:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes paul@a... 2000-10-11 15:36:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Alan Marconett KM6VV 2000-10-11 15:59:56 UTC Re: Locating already drilled holes Jerry Kimberlin 2000-10-11 16:12:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Terry Ackland 2000-10-11 17:48:19 UTC Re: Locating already drilled holes Anne Ogborn 2000-10-11 22:28:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes ballendo@y... 2000-10-11 22:59:25 UTC Re: Re: Locating already drilled holes Ron Ginger 2000-10-12 06:27:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Locating already drilled holes Peter Chen 2000-10-13 15:33:00 UTC Re: Locating already drilled holes Alan Marconett KM6VV 2000-10-13 19:33:55 UTC Re: Locating already drilled holes