Re: EMC and stepper driver

Jon Wrote:

> Servos can not lose sync or miss steps, as there are none.
> The Gecko servo drives can lose steps, in blocks of 128, I think,
>if I understand his design.

WallK. Wrote:

> > If the G320 is
> > conditioning the signal then we should ask Mariss at geckodrive to
> > put this conditioning in his line of stepper controllers.
>

Jon Wrote:

> I believe his line of multiplier stepping drives have this feature.
>
> Jon

Wally replys:

I do not think the stepper drivers could have this feature. If you
are running 2 or 3 axis and each drive is buffering the step signals
you would probally loose sync of the stepper signals in relation to
each axis. This would be a disaster in circular interpolation.

Wally K.