Re: EDM, was Re: Cheap Encoders
Posted by
Jim GREGG
on 1999-07-17 18:25:03 UTC
Hi Bill and list.
I assume that by "Parafin" you mean in US/Aust terms "Kerosine" - not the
viscous thick stuff sold by pharmacists as "Liquid Parafin" to do dreadful
things to your insides.
Jim Gregg
W. Australia
At 20:58 17/07/99 +0100, you wrote:
If someone can tell us what the best current/voltage/repetition
I assume that by "Parafin" you mean in US/Aust terms "Kerosine" - not the
viscous thick stuff sold by pharmacists as "Liquid Parafin" to do dreadful
things to your insides.
Jim Gregg
W. Australia
At 20:58 17/07/99 +0100, you wrote:
>From: Bill Phillips <Bill@...>+++++++++++++++++++++++><<<<<<< HUGE CUT >>>+++++++++++++++++++++++++
If someone can tell us what the best current/voltage/repetition
>rate is maybe I could speed up the errosion rate? By the way I used Parafindiscussion of shop built systems in the above catagories.
>as a fluid. No problems as long as the work is well covered and you ensure
>it stays cool.
>
>Bill Phillips
>
>
>
>--------------------------- ONElist Sponsor ----------------------------
>
>ONElist members are using Shared Files in great ways!
>http://www.onelist.com
>Are you? If not, see our homepage for details.
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the
>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>bill,
>List Manager
>
>
Discussion Thread
Tim Goldstein
1999-07-15 22:38:57 UTC
EDM, was Re: Cheap Encoders
Scott Acorn
1999-07-16 15:11:42 UTC
Re: EDM, was Re: Cheap Encoders
garfield@x...
1999-07-16 15:48:53 UTC
Re: EDM, was Re: Cheap Encoders
TADGUNINC@x...
1999-07-16 18:15:41 UTC
Re: EDM, was Re: Cheap Encoders
George Potter
1999-07-16 22:57:53 UTC
Re: EDM, was Re: Cheap Encoders
Ian W. Wright
1999-07-17 01:19:24 UTC
Re: EDM, was Re: Cheap Encoders
PTENGIN@x...
1999-07-17 02:51:14 UTC
Re: EDM, was Re: Cheap Encoders
Bill Phillips
1999-07-17 12:58:06 UTC
Re: EDM, was Re: Cheap Encoders
Scott Acorn
1999-07-17 17:20:35 UTC
Re: EDM, was Re: Cheap Encoders
Jim GREGG
1999-07-17 18:25:03 UTC
Re: EDM, was Re: Cheap Encoders
John Grant
1999-07-17 19:48:27 UTC
Re: EDM, was Re: Cheap Encoders
Scott Acorn
1999-07-17 19:03:27 UTC
Re: EDM, was Re: Cheap Encoders
Ted Robbins
1999-07-17 20:08:47 UTC
Re: EDM, was Re: Cheap Encoders
Bill Phillips
1999-07-18 13:37:59 UTC
Re: EDM, was Re: Cheap Encoders
Scott Acorn
1999-07-21 17:53:26 UTC
Re: EDM, was Re: Cheap Encoders