Re: [CAD_CAM_EDM_DRO] Re: re:defiance vmc wasRe: Re: wrong conversion factor ...
Posted by
dave engvall
on 2000-12-01 10:14:16 UTC
Smoke wrote:By the way...after looking at that Zanite web site,....they mix silicon
Maybe it is possible to combine the best of both worlds....i.e. use concrete for the bulk of a frame and mount, rather precisely,
the critical way components with about an inch of filled epoxy around them. That way you get at least some of the dampening but
also lower the cost.
Dave
> dioxide (sounds like sand to me) having a minium size of 1/2 inch diameterAFIK quartz is simply very pure SiO2. Should not be too hard to find.
> with epoxy for creating their machine components.
>
> Smoke
Maybe it is possible to combine the best of both worlds....i.e. use concrete for the bulk of a frame and mount, rather precisely,
the critical way components with about an inch of filled epoxy around them. That way you get at least some of the dampening but
also lower the cost.
Dave
Discussion Thread
Jon Elson
2000-11-29 20:34:20 UTC
Re: [CAD_CAM_EDM_DRO] re:defiance vmc wasRe: Re: wrong conversion factor ...
Smoke
2000-11-29 21:10:31 UTC
Re: [CAD_CAM_EDM_DRO] re:defiance vmc wasRe: Re: wrong conversion factor ...
William Scalione
2000-11-29 21:36:19 UTC
re:defiance vmc wasRe: Re: wrong conversion factor ...
Ken Jenkins
2000-11-30 21:32:50 UTC
Re:defiance vmc wasRe: Re: wrong conversion factor ...
dave engvall
2000-12-01 10:14:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:defiance vmc wasRe: Re: wrong conversion factor ...
Smoke
2000-12-01 10:24:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:defiance vmc wasRe: Re: wrong conversion factor ...
Marcus & Eva
2000-12-01 18:57:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:defiance vmc wasRe: Re: wrong conversion factor ...