Re: PC based CNC system architecture
Posted by
Wally K
on 2000-12-11 04:27:45 UTC
Jon Elson wrote:
WOW.
I know exactly what you mean. I did a couple of projects with 30 and
15 cards. It was far cheaper to build from scratch.
>put
>
> > Wally K wrote:
> > On the proposed 4 axis stepper card you are working on. Can you
> > more than 1 card in the motherbord.Wally K. replys:
>
> Yes, up to 8. If that's not enough, the motherboards are chainable.
>
WOW.
> > > > Wally K.Wally K. replys:
> > > > And are you physically building a mechanical card cage.
> >
> > > Matt Replys:
> > > Yes, it's actually cheaper than buying a pre made one.
>
> We looked into this last summer, and it was an eye opener!
> Totally ridiculous!
>
> Jon
I know exactly what you mean. I did a couple of projects with 30 and
15 cards. It was far cheaper to build from scratch.
Discussion Thread
Jeff Barlow
2000-12-08 16:14:56 UTC
PC based CNC system architecture
Mike Gann
2000-12-08 16:39:49 UTC
Re: [CAD_CAM_EDM_DRO] PC based CNC system architecture
Jeff Barlow
2000-12-08 17:32:27 UTC
Re: [CAD_CAM_EDM_DRO] PC based CNC system architecture
Wally K
2000-12-08 17:41:26 UTC
Re: PC based CNC system architecture
Mariss Freimanis
2000-12-08 18:30:56 UTC
Re: PC based CNC system architecture
Mike Gann
2000-12-08 20:14:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Tim Goldstein
2000-12-08 20:18:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Jon Elson
2000-12-08 23:08:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Matt Shaver
2000-12-08 23:38:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Wally K
2000-12-09 03:01:46 UTC
Re: PC based CNC system architecture
Steve Stallings
2000-12-09 05:39:23 UTC
RE: PC based CNC system architecture
John Beidl
2000-12-09 07:11:05 UTC
Re: [CAD_CAM_EDM_DRO] RE: PC based CNC system architecture
Smoke
2000-12-09 08:30:19 UTC
Re: [CAD_CAM_EDM_DRO] RE: PC based CNC system architecture
cnc002@a...
2000-12-09 17:47:06 UTC
Re: [CAD_CAM_EDM_DRO] PC based CNC system architecture
Jon Elson
2000-12-09 22:41:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Jon Elson
2000-12-09 22:59:44 UTC
Re: [CAD_CAM_EDM_DRO] RE: PC based CNC system architecture
Matt Shaver
2000-12-10 03:25:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
John Beidl
2000-12-10 04:42:15 UTC
Re: [CAD_CAM_EDM_DRO] RE: PC based CNC system architecture
Wally K
2000-12-10 10:30:11 UTC
Re: PC based CNC system architecture
Wally K
2000-12-10 10:50:22 UTC
Re: PC based CNC system architecture
Tim Goldstein
2000-12-10 11:15:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Matt Shaver
2000-12-10 17:27:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Wally K
2000-12-10 19:37:11 UTC
Re: PC based CNC system architecture
ballendo@y...
2000-12-10 21:27:09 UTC
Re: PC based CNC system architecture
Matt Shaver
2000-12-10 21:45:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Jon Elson
2000-12-10 22:28:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Jon Elson
2000-12-10 23:01:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Jon Elson
2000-12-11 00:20:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Jon Elson
2000-12-11 00:23:26 UTC
Re: [CAD_CAM_EDM_DRO] RE: PC based CNC system architecture
Wally K
2000-12-11 02:15:37 UTC
Re: PC based CNC system architecture
Wally K
2000-12-11 02:38:34 UTC
Re: PC based CNC system architecture
ballendo@y...
2000-12-11 03:16:28 UTC
re: Re: PC based CNC system architecture
Wally K
2000-12-11 03:28:44 UTC
Re: PC based CNC system architecture
Wally K
2000-12-11 04:27:45 UTC
Re: PC based CNC system architecture
Jon Elson
2000-12-11 13:06:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Wally K
2000-12-11 14:02:30 UTC
Re: PC based CNC system architecture
Jon Elson
2000-12-11 16:14:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Wally K
2000-12-11 20:27:00 UTC
Re: PC based CNC system architecture
Jon Elson
2000-12-11 22:03:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Jon Elson
2000-12-11 22:38:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Matt Shaver
2000-12-11 22:40:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
dave engvall
2000-12-12 08:44:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Alan Marconett KM6VV
2000-12-12 10:39:05 UTC
Re: PC based CNC system architecture
Greg Nuspel
2000-12-12 10:40:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
cnc002@a...
2000-12-12 13:13:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture
Jon Elson
2000-12-12 16:30:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: PC based CNC system architecture