Re: [CAD_CAM_EDM_DRO] info needed

Can't you just use your regular finish turn program and simply "lie to the
machine"...tell it the tool bit is closer to centerline than it really is.
After the "rough turn" cycle, reset the tool position and do the finish
turning.

Smoke

>Does anyone know of any software available For turning that can
>figure a rough turn cycle in steps for a machine that does not have a
>rough canned cycle? something that all you have to do is input
>Dimensions like lqc2000 AKA lathe quick code 2000
>Bill
>
>