Re: [CAD_CAM_EDM_DRO] 2-D shape Cutting solutions.
Posted by
Smoke
on 2001-01-12 12:31:18 UTC
I just got a brochure in the mail (finally) from Broco. www.Brocoinc.com
They make a torch system that runs on a 12 volt battery and an oxygen
bottle. It will cut up to 6" thick steel plate. The cost is very cheap
too, since all you'd need is the smallest version they sell. You could
mount it so as to be easily removed and still use it as a portable
cutting/gouging torch.
Smoke
-----Original Message-----
From: Hans Vogel <hvogel@...>
To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
Date: Thursday, January 11, 2001 2:22 PM
Subject: [CAD_CAM_EDM_DRO] 2-D shape Cutting solutions.
They make a torch system that runs on a 12 volt battery and an oxygen
bottle. It will cut up to 6" thick steel plate. The cost is very cheap
too, since all you'd need is the smallest version they sell. You could
mount it so as to be easily removed and still use it as a portable
cutting/gouging torch.
Smoke
-----Original Message-----
From: Hans Vogel <hvogel@...>
To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
Date: Thursday, January 11, 2001 2:22 PM
Subject: [CAD_CAM_EDM_DRO] 2-D shape Cutting solutions.
>Ladies and Gentlmen,discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
>I have worked with a water jet 2D CnC shape cutter and it would suit my
>needs in a hobby respect except that they are cost prohibitive.
>
>I would like info on building a 2D shape cutter. If I understand
>correctly the stepper motor and machine superstructure would not be that
>difficult, its the cutter,
>I am looking to build something that will cut 4'X4' sheetmetal up to say
>1/4" steel.
>
>Thanks
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@egroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>Moderator: jmelson@... [Moderator]
>URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
>FAQ: http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>
>
Discussion Thread
Hans Vogel
2001-01-11 12:28:14 UTC
2-D shape Cutting solutions.
Joe Vicars
2001-01-11 12:56:33 UTC
Re: [CAD_CAM_EDM_DRO] 2-D shape Cutting solutions.
Hans Vogel
2001-01-11 13:21:46 UTC
Re: [CAD_CAM_EDM_DRO] 2-D shape Cutting solutions.
Joe Vicars
2001-01-11 13:55:38 UTC
Re: [CAD_CAM_EDM_DRO] 2-D shape Cutting solutions.
Smoke
2001-01-12 12:31:18 UTC
Re: [CAD_CAM_EDM_DRO] 2-D shape Cutting solutions.