Re: [CAD_CAM_EDM_DRO] Re: Simple EDM schematics...

In a message dated 1/15/01 8:24:11 PM Hawaiian Standard Time,
indigo_red@... writes:
It ate away about 3/16" in about 2.5 hours of trial and error. Very
painful!!! The tap was a 10-24.

-Lee

>>

Lee,

Try some brass tubing next time. If you spin 3/32" brass tubing, the EDM
will cut much faster. If like Jon E. says, you drip alumitap onto the cut, it
will work ten times faster.....

Peter
THRD, Inc.