Re: Servomotor w/Enc. Part II
Posted by
Tom Csibor
on 2001-01-24 16:34:21 UTC
Along the same lines as this thread, I have just recently purchased 3
of the same 320 Gecko drives to retrofit my mill. The current
encoders (really resolvers) need to be updated. Can anyone give me
some advice as to the type of encoder and possible sources that would
work well with the 320 drives?
Thank you
Tom Csibor.
of the same 320 Gecko drives to retrofit my mill. The current
encoders (really resolvers) need to be updated. Can anyone give me
some advice as to the type of encoder and possible sources that would
work well with the 320 drives?
Thank you
Tom Csibor.
--- In CAD_CAM_EDM_DRO@egroups.com, Jon Elson <jmelson@a...> wrote:
>
>
> NCS wrote:
>
> > Found s'more surplus servomotors!
> >
> > http://www.herbach.com/images/dcgear.pdf
> >
> > They have a few with "HEDS-9100" encoder...is this
> > G320 compatible?
>
> The motor TM98MTR3118 looks like it would be compatible, but is
much too
> small for most machine tool applications. It might be able to
handle a Sherline,
> though. You would get 2000 quadrature counts/revolution with a 500
cycle
> encoder. This motor has a shipping weight of 2 pounds.
>
> Jon
Discussion Thread
NCS
2001-01-24 08:36:48 UTC
Servomotor w/Enc. Part II
Jon Elson
2001-01-24 12:13:44 UTC
Re: [CAD_CAM_EDM_DRO] Servomotor w/Enc. Part II
Tom Csibor
2001-01-24 16:34:21 UTC
Re: Servomotor w/Enc. Part II
Tim Goldstein
2001-01-24 16:51:05 UTC
RE: [CAD_CAM_EDM_DRO] Re: Servomotor w/Enc. Part II
Tom Csibor
2001-01-24 17:41:33 UTC
Re: Servomotor w/Enc. Part II
Jon Elson
2001-01-24 22:26:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Servomotor w/Enc. Part II
Dan Mauch
2001-01-25 07:20:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Servomotor w/Enc. Part II