G201A - round of applause for Mariss..
Posted by
Doug Fortune
on 2001-02-23 17:12:35 UTC
mariss92705@... wrote:
Does this use the quadrature encoder for feedback, and if so, how do
you compensate for differing counts/rev from different models. Does
it need the index pulse?
Doug Fortune
> I've made some improvements to the G201These are BIG wins!
> that were were requested. The improvements are:
>
> 1) Automatic current standby of 33% of set current after 1 second after
> last issued step pulse,(disableable internally).
>
> 3) The opto-isolator now operates at 8mA instead of 16mA. The greater
> sensitivity better matches the drive capability of a LPT port.
> All these improvements are at no increase in price.That never hurts either....
> Minor stuff includes a common servoamp design (+/- 10 vot inputWhooa, this is not minor .. a bunch of us have been waiting for this!
> transconductance amplifier) and a 3-phase brushless DC servoamplifier.
Does this use the quadrature encoder for feedback, and if so, how do
you compensate for differing counts/rev from different models. Does
it need the index pulse?
> MarissGood work!
> Geckodrive Inc.
Doug Fortune
Discussion Thread
Doug Fortune
2001-02-23 17:12:35 UTC
G201A - round of applause for Mariss..
mariss92705@y...
2001-02-23 19:22:46 UTC
Re: G201A - round of applause for Mariss..
Bob Bachman
2001-02-26 15:41:02 UTC
Free McMaster Carr Catalog
Bruce Mowbray
2001-02-26 17:45:18 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Jon Anderson
2001-02-26 19:13:15 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Bruce Mowbray
2001-02-27 04:39:47 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Garry and Maxine
2001-02-28 05:55:47 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Larry Van Duyn
2001-02-28 06:18:09 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Bruce Mowbray
2001-02-28 06:44:10 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Larry Edington
2001-02-28 09:00:55 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Joe Vicars
2001-02-28 09:52:23 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Jerry Kimberlin
2001-02-28 11:02:15 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
JanRwl@A...
2001-02-28 21:03:33 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Tom Eldredge
2001-03-02 05:53:33 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
e.heritage@b...
2001-03-02 06:05:15 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Garry and Maxine
2001-03-02 08:03:28 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
Joe Vicars
2001-03-02 09:11:28 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog
davemucha@j...
2001-03-02 11:41:00 UTC
Re: Free McMaster Carr Catalog
dave engvall
2001-03-02 12:06:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Free McMaster Carr Catalog
Smoke
2001-03-02 20:46:43 UTC
Re: [CAD_CAM_EDM_DRO] Free McMaster Carr Catalog