Re: Step resolution question, dividing head

--- In CAD_CAM_EDM_DRO@e..., Paul <Paul.Corner@t...> wrote:

>

Jon

I had just the same problem a while ago so I had a 54 tooth steel
wheel professionally cut for a 'L' series 3/8" pitch belt x 1" wide.
It was rather a largish dividing head <g>
Turns out it wasn't needed so it's sitting on a shelf here somewhere
looking for a new owner.

>
> Just picked up the HPC catalog -
> 2.5mm pitch 10mm wide 54 tooth pully £8.50 or beefier 5mm pitch

25mm wide for

> £20.36. Both available in aluminium.
>
> Imperial equivalents should be available your side of the pond for

the same

> price or less.
>
> Regards, Paul.
>
> On Thu, 01 Mar 2001, Jon Anderson wrote:
> > My only problem now is that nobody makes a 54 tooth timing belt

pulley

> > in a material I can use (don't think Lexan is ideal for my

application)