Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
Posted by
Jon Anderson
on 2001-03-04 18:09:13 UTC
Would help to know what material you are cutting. Also, if you are
cutting a dovetail slot (as opposed to cutting down the outside edge of
the material), I hope you're aware you need to rough out the slot first.
Jon
cutting a dovetail slot (as opposed to cutting down the outside edge of
the material), I hope you're aware you need to rough out the slot first.
Jon
Discussion Thread
marble_h@y...
2001-03-04 16:52:34 UTC
cutting speed and feed for 3/4" dovetail cutter
Brian Pitt
2001-03-04 17:41:27 UTC
Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
Jon Anderson
2001-03-04 18:09:13 UTC
Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
Jon Elson
2001-03-04 21:48:12 UTC
Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
Bill Darby
2001-03-04 22:04:37 UTC
Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
marble here
2001-03-05 02:34:58 UTC
Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
Jon Anderson
2001-03-05 07:04:10 UTC
Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
Jon Elson
2001-03-05 11:35:29 UTC
Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
John Stevenson
2001-03-05 15:48:22 UTC
Re: cutting speed and feed for 3/4" dovetail cutter
marble here
2001-03-05 19:41:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: cutting speed and feed for 3/4" dovetail cutter
marble here
2001-03-05 19:44:09 UTC
Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter
ballendo@y...
2001-03-06 05:18:37 UTC
moly-dee ??? was Re: cutting speed and feed for 3/4" dovetail cutter
Tim Goldstein
2001-03-06 05:32:56 UTC
RE: [CAD_CAM_EDM_DRO] moly-dee ??? was Re: cutting speed and feed for 3/4" dovetail cutter