CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: cutting speed and feed for 3/4" dovetail cutter

Posted by marble here
on 2001-03-05 19:41:12 UTC
John
It is a 3/8 " shank I have cut all the pockets
to night looks like I will have get a new one I will
look at a cobalt looks like the cost of it is 52.00
cdn .I found a cheeper vender Thank you all for the
information..

John



--- John Stevenson <machines@...> wrote:
> --- In CAD_CAM_EDM_DRO@e..., Jon Elson
> <jmelson@a...> wrote:
> >
> >
> > marble here wrote:
> >
> > > Sorry all yes I have milled out the pocket
> first and
> > > the steel is D2 tool steel only one part is so I
> > > thought I should get that done first and the
> cutter is
> > > a 3/4 "8 flute
> >
> > Oh, well the D2 is why you are having a problem.
> You might try
> increasing
> > the speed a little, and the feed a bit more than
> that, to get a
> good .001 - .002"
> > per tooth, at least. What is the shank diameter?
> >
> > You may have to get a stronger tool, either M-42
> or some other
> Cobalt HSS,
> > or go all the way to carbide. Yes, I know, a
> carbide tool will be
> REALLY
> > expensive.
> >
> Possibly not as expensive as you think.
> J&L here in the UK do a small 3/4" tool with one
> carbide insert.
> Incidently it's the triangular one that seems to be
> standard in face
> mills. cost here is about 72 UKP so judging by your
> prices it should
> be about that in dollars. I can look the part number
> up but not
> certain if US numbers are the same as Uk ones. I
> would have thought
> they would be.
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an
> unmoderated list for the discussion of shop built
> systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@...
> Moderator: jmelson@...
> timg@... [Moderator]
> URL to this page:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>


__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/

Discussion Thread

marble_h@y... 2001-03-04 16:52:34 UTC cutting speed and feed for 3/4" dovetail cutter Brian Pitt 2001-03-04 17:41:27 UTC Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter Jon Anderson 2001-03-04 18:09:13 UTC Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter Jon Elson 2001-03-04 21:48:12 UTC Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter Bill Darby 2001-03-04 22:04:37 UTC Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter marble here 2001-03-05 02:34:58 UTC Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter Jon Anderson 2001-03-05 07:04:10 UTC Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter Jon Elson 2001-03-05 11:35:29 UTC Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter John Stevenson 2001-03-05 15:48:22 UTC Re: cutting speed and feed for 3/4" dovetail cutter marble here 2001-03-05 19:41:12 UTC Re: [CAD_CAM_EDM_DRO] Re: cutting speed and feed for 3/4" dovetail cutter marble here 2001-03-05 19:44:09 UTC Re: [CAD_CAM_EDM_DRO] cutting speed and feed for 3/4" dovetail cutter ballendo@y... 2001-03-06 05:18:37 UTC moly-dee ??? was Re: cutting speed and feed for 3/4" dovetail cutter Tim Goldstein 2001-03-06 05:32:56 UTC RE: [CAD_CAM_EDM_DRO] moly-dee ??? was Re: cutting speed and feed for 3/4" dovetail cutter