CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Cable Sources/Recommendations?

Posted by Jon Elson
on 2001-03-21 21:39:06 UTC
Matt Shaver wrote:

> Most of the wiring and cabling requirements of the controls I make and
> modify are covered by readily available materials such as S cord,
> machine tool rated hookup wire and PVC insulated low voltage control
> cable. There are two applications for which I've been unable to find
> cable materials that I really like. I've modified several Bridgeport
> controls and they have had cabling custom made for these applications
> which I've reused, but I can't get the same material new.
>
> The first application is cabling to connect motors to their drives. This
> one material would be used for both servo systems where there are two
> motor wires and two tach wires, and stepper motor systems with four
> motor leads. I'd like a stranded, 16g/4 conductor plastic sheathed cable
> material arranged as two twisted pairs.

Allied has Alpha 2 pair 16 Ga with shield type 5610B1602 at $544/1000'
which is a good price. I don't know if they can sell 100' spools of that.
This is with one overall shield. It may be a lot cheaper to use a 24 Ga cable
for the tach, and a single shielded pair for the motor (for servo applications).

> The second application is encoder to control cabling. This needs to be 8
> conductor cable arranged as 4 twisted pairs with either individual
> shields, or one shield overall (with bare drain wire in either case).
> The sheath would probably be PVC, but other materials are OK as long as
> they are flexible. I guess I'd prefer 22g conductors for ease of use
> with insulated crimp on connectors, but 24g or 26g would certainly be
> adequate.

Allied has Alpha 4 pair 20Ga 5620B2004 with individually shielded pairs
at $557.60/1000'

These are from last year's catalog, so the price may have changed.

Jon

Discussion Thread

Matt Shaver 2001-03-21 10:54:49 UTC Cable Sources/Recommendations? Jon Elson 2001-03-21 21:39:06 UTC Re: [CAD_CAM_EDM_DRO] Cable Sources/Recommendations? Matt Shaver 2001-03-21 22:48:35 UTC Re: [CAD_CAM_EDM_DRO] Cable Sources/Recommendations? John Murphy 2001-03-21 23:01:08 UTC Re: [CAD_CAM_EDM_DRO] Cable Sources/Recommendations? John Craddock 2001-03-21 23:06:22 UTC RE: [CAD_CAM_EDM_DRO] Cable Sources/Recommendations? ptengin@a... 2001-03-23 00:28:01 UTC Re: [CAD_CAM_EDM_DRO] Cable Sources/Recommendations? Jon Elson 2001-03-23 11:32:24 UTC Re: [CAD_CAM_EDM_DRO] Cable Sources/Recommendations? Ray 2001-03-24 07:39:04 UTC Re: Cable Sources/Recommendations?