Re: Sneakernet
Posted by
Tony Jeffree
on 2001-04-04 00:37:11 UTC
"Sneakernet" refers to the very reliable, high bandwidth network created by
running between machines (in your best sneakers - must be Nike or a
similarly prestigious label, of course) carrying fists full of floppy
disks, CD Roms, mag tapes, ... etc. You wouldn't find it on the M$ website
because the technology is far too recent... ;-)
Actually, with a few DAT tapes in your pocket, you can achieve MUCH higher
data transfer rates with sneakernet than with 100 Mbit/s Ethernet.
Regards,
Tony
At 07:06 04/04/2001 +0000, you wrote:
running between machines (in your best sneakers - must be Nike or a
similarly prestigious label, of course) carrying fists full of floppy
disks, CD Roms, mag tapes, ... etc. You wouldn't find it on the M$ website
because the technology is far too recent... ;-)
Actually, with a few DAT tapes in your pocket, you can achieve MUCH higher
data transfer rates with sneakernet than with 100 Mbit/s Ethernet.
Regards,
Tony
At 07:06 04/04/2001 +0000, you wrote:
>Where do you find "sneakernet"? I looked on M$ ftp site.
>
>CADMAN
>
>--- In CAD_CAM_EDM_DRO@y..., "Larry Edington" <ledington@c...> wrote:
> > Yea, there are ways to network the DOS box. But it's just
> > not worth the trouble to me. I lived
> > through networking from Netware days to Windows days. I've
> > run several DOS machines on
> > a network. I shall NOT go back to those headaches ever
> > again. So sneakernet is the easiest
> > and most trouble free solution until all my Cnc controls are
> > Windows based.
Discussion Thread
Tony Jeffree
2001-04-04 00:37:11 UTC
Re: Sneakernet
Brian Pitt
2001-04-04 00:59:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
Marcus & Eva
2001-04-04 07:52:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
cadman@p...
2001-04-04 08:27:09 UTC
Re: Sneakernet
Tim Goldstein
2001-04-04 08:28:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sneakernet
Tony Jeffree
2001-04-04 09:49:42 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
Jon Elson
2001-04-04 11:47:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
e.heritage@b...
2001-04-04 18:05:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
Tony Jeffree
2001-04-05 01:55:38 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
e.heritage@b...
2001-04-05 14:41:26 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
Smoke
2001-04-05 17:57:39 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
e.heritage@b...
2001-04-05 18:32:39 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
Smoke
2001-04-05 18:37:45 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet