Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
Posted by
Jon Elson
on 2001-04-04 11:47:03 UTC
Tony Jeffree wrote:
the full EMC ditribution set in less than 5 seconds. So, that is close to
1 MBYTE / second. Given the time to write a tape, carry it, and read
it at the other location, I'm sure that even the 10MB/sec ethernet is
a little faster. The 100 MB/sec is WAY faster, it should transfer at
nearly 100% of the transfer rate of the slowest hard disk drive.
Note that with the net, you are reading from one computer and writing
on the other SIMULTANEOUSLY.
Jon
> "Sneakernet" refers to the very reliable, high bandwidth network created byAbsolute baloney! I have only 10 MB/S ethernet, and I can transmit
> running between machines (in your best sneakers - must be Nike or a
> similarly prestigious label, of course) carrying fists full of floppy
> disks, CD Roms, mag tapes, ... etc. You wouldn't find it on the M$ website
> because the technology is far too recent... ;-)
>
> Actually, with a few DAT tapes in your pocket, you can achieve MUCH higher
> data transfer rates with sneakernet than with 100 Mbit/s Ethernet.
the full EMC ditribution set in less than 5 seconds. So, that is close to
1 MBYTE / second. Given the time to write a tape, carry it, and read
it at the other location, I'm sure that even the 10MB/sec ethernet is
a little faster. The 100 MB/sec is WAY faster, it should transfer at
nearly 100% of the transfer rate of the slowest hard disk drive.
Note that with the net, you are reading from one computer and writing
on the other SIMULTANEOUSLY.
Jon
Discussion Thread
Tony Jeffree
2001-04-04 00:37:11 UTC
Re: Sneakernet
Brian Pitt
2001-04-04 00:59:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
Marcus & Eva
2001-04-04 07:52:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
cadman@p...
2001-04-04 08:27:09 UTC
Re: Sneakernet
Tim Goldstein
2001-04-04 08:28:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sneakernet
Tony Jeffree
2001-04-04 09:49:42 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
Jon Elson
2001-04-04 11:47:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
e.heritage@b...
2001-04-04 18:05:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sneakernet
Tony Jeffree
2001-04-05 01:55:38 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
e.heritage@b...
2001-04-05 14:41:26 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
Smoke
2001-04-05 17:57:39 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
e.heritage@b...
2001-04-05 18:32:39 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet
Smoke
2001-04-05 18:37:45 UTC
Re: [CAD_CAM_EDM_DRO] Sneakernet