Re: Panel Layout Software
Posted by
John Stevenson
on 2001-04-05 05:39:49 UTC
--- In CAD_CAM_EDM_DRO@e..., Donald Kelley <dkelley@w...> wrote:
Sorry I can't help with your problem but you may have better luck if
you search on the web for NESTING programs, as this is what they are
called.
John Stevenson
> Hi,Donald,
>
> Speaking of Drawings.... nice segue huh :-)
>
> I suddenly have a need for finding efficient layup
> of rectangular flat parts on a sheet of stock. Like
> cutting pieces out of a sheet of plywood or flame (plasma)
> cutting pieces from standard sized plate metal. I am aware that
> there are many commercial packages available but I am
> doing this as a hobby and would not want to spend much(any)
> money on it. It seems to me that this problem is more or less
> universal and would have been solved many times before. I have
> spent hours searching the web and have turned up nothing (for
> free).
Sorry I can't help with your problem but you may have better luck if
you search on the web for NESTING programs, as this is what they are
called.
John Stevenson
Discussion Thread
Donald Kelley
2001-04-05 04:52:01 UTC
Panel Layout Software
John Stevenson
2001-04-05 05:39:49 UTC
Re: Panel Layout Software
Jon Elson
2001-04-05 11:35:05 UTC
Re: [CAD_CAM_EDM_DRO] Panel Layout Software
Donald Kelley
2001-04-05 11:43:28 UTC
RE: [CAD_CAM_EDM_DRO] Panel Layout Software
Peter Chen
2001-04-05 15:03:25 UTC
Panel Layout Software
Smoke
2001-04-05 18:03:49 UTC
Re: [CAD_CAM_EDM_DRO] Panel Layout Software
Donald Kelley
2001-04-06 08:23:33 UTC
RE: [CAD_CAM_EDM_DRO] Panel Layout Software
Peter Chen
2001-04-06 20:59:33 UTC
Panel Layout Software
Roger Brower
2001-04-07 07:21:33 UTC
Panel Layout Software