Re: [CAD_CAM_EDM_DRO] Re: Next step for hobby CNC
Posted by
Joe Vicars
on 2001-04-11 13:26:32 UTC
That and short prototype runs. If I had one that I could program really quickly I could pick up a few weldment jobs.
We got homebuilt plasma gantry, why not a welder?
hexagon@... wrote:
We got homebuilt plasma gantry, why not a welder?
hexagon@... wrote:
> ---Sorry, fill me in on this one, a home shop welding robot?
> It must be just the challenge of building one, surely?
> Terry
>
> In CAD_CAM_EDM_DRO@y..., jvicars@c... wrote:
> > What I would like to build is a home shop welding robot. The one
> > thing missing is the ability to run a program by "teaching".
> >
> > All the MIG robots I have seen work this way. You switch the
> machine
> > to "Teach Mode" and manually move the welding head around the work
> in
> > whatever path you need. While you are doing this the computer
> records
> > the motion and translates into G-code. You have simple record,
> pause,
> > rewind, etc.
> >
> > I pictured building this with steppers with encoder feedback. The
> > "recording" program and the control dont' even have to be related.
> > There's no reason CNCpro (or other hobby controller) couldn't run a
> 3
> > or 4 axis robot arm. The problem right now is on the software side.
> > The Gecko G201's already have the free spooling feature built in
> which
> > would make it very easy to switch back and fourth from teach to run
> > modes.
> >
> > Does anyone know of any software (free or cheap) that will perform
> > this "recording" function as I have described? Are there some
> details
> > that I am missing?
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
jvicars@c...
2001-04-11 02:52:50 UTC
Next step for hobby CNC
hexagon@o...
2001-04-11 12:58:52 UTC
Re: Next step for hobby CNC
Joe Vicars
2001-04-11 13:26:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Next step for hobby CNC
hexagon@o...
2001-04-11 18:47:39 UTC
Re: Next step for hobby CNC
Doug Fortune
2001-04-11 20:12:31 UTC
Next step for hobby CNC
JanRwl@A...
2001-04-11 21:01:39 UTC
Re: [CAD_CAM_EDM_DRO] Next step for hobby CNC
diazden
2001-04-12 08:14:12 UTC
Re: [CAD_CAM_EDM_DRO] Next step for hobby CNC
Joe Vicars
2001-04-12 08:54:23 UTC
Re: [CAD_CAM_EDM_DRO] Next step for hobby CNC
Robert Allen & Marsha Camp
2001-04-12 16:06:01 UTC
Re: [CAD_CAM_EDM_DRO] Next step for hobby CNC
rab@r...
2001-04-12 16:39:54 UTC
Re: Next step for hobby CNC
jvicars@c...
2001-04-13 04:43:11 UTC
Animation, was (Re: Next step..)
Tom Eldredge
2001-04-15 10:54:45 UTC
Re: [CAD_CAM_EDM_DRO] Next step for hobby CNC
Tom Eldredge
2001-04-15 10:54:48 UTC
Re: [CAD_CAM_EDM_DRO] Next step for hobby CNC
Tom Eldredge
2001-04-15 10:54:53 UTC
Re: [CAD_CAM_EDM_DRO] Animation, was (Re: Next step..)