CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] I think somebofy got a STEAL on a Monarch 16 x

Posted by Jon Elson
on 2001-04-18 11:53:42 UTC
"Sven Peter, TAD S.A." wrote:

> Perhaps you can ask a local machine supplier who would lend his low
> profile dollies. If not: I moved a few month ago a 4 ton injection press
> using
> a few 1 1/2 1020 bars under some c profiles that made the bottom flat
> it worked fine except that I damaged the shop floor with the pry bar.

I used this to move my Bridgeport. The problem with lathes is they
usually have 2 relatively small 'feet' at each end of the bed, and you need to
be really careful with the rollers, to make sure there are always at least one
under each foot.

Jon

Discussion Thread

Sven Peter, TAD S.A. 2001-04-18 09:44:28 UTC Re: [CAD_CAM_EDM_DRO] I think somebofy got a STEAL on a Monarch 16 x Jon Elson 2001-04-18 11:53:42 UTC Re: [CAD_CAM_EDM_DRO] I think somebofy got a STEAL on a Monarch 16 x stratton@m... 2001-04-18 12:16:13 UTC Re: [CAD_CAM_EDM_DRO] I think somebofy got a STEAL on a Monarch 16 x paul@a... 2001-04-18 12:18:46 UTC Re: [CAD_CAM_EDM_DRO] I think somebofy got a STEAL on a Monarch 16 x Sven Peter, TAD S.A. 2001-04-18 20:56:33 UTC Re: [CAD_CAM_EDM_DRO] I think somebofy got a STEAL on a Monarch 16 x Smoke 2001-04-19 09:26:53 UTC Re: [CAD_CAM_EDM_DRO] I think somebofy got a STEAL on a Monarch 16 x