Re: Linux help

Darrell,

The trident card is capable of 800X600 resolution in addition to 640X480.
You will need a monitor capable of that resolution.
(I have the same trident cards in 2 machines running emc.)

EMC will run in the 640x480 mode but you need at least 800x600 to use
Tim's RT patch installation script. You will also need RH5.2.

Bob

At 06:33 PM 8/30/99 -0700, you wrote:

>From: "Darrell Gehlsen" <darrell@...>
>
>I now have Red Hat 5.1 up and running. xfree-86 works but all I can get is
>620X480 res. I have a trident 8900c with 1024 on board mem. Do I need
>xfree-86 to run EMC?
>My problem now is how do I connect to my ISP? I have Netscape but no dialer.
>My Linux box is Linux only, no other OS on it.
>Darrell
>
>> ------------------------------------------------------------------------
>> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>discussion of shop built systems in the above catagories.
>> To Unsubscribe, read archives, change to or from digest.
>> Go to: http://www.onelist.com/isregistered.cgi
>> Log on, and you will go to Member Center, and you can make changes there.
>> For the FAQ, go to http://www.ktmarketing.com/faq.html
>> bill,
>> List Manager
>>
>
>
>--------------------------- ONElist Sponsor ----------------------------
>
>ONElist: your connection to people who share your interests.
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>