Mister system was Re: orange peel on aluminum
Posted by
Bill Griffin
on 2001-04-23 09:14:54 UTC
--- In CAD_CAM_EDM_DRO@y..., ballendo@y... wrote:
I had tried several types of mist systems and every one of them woudl
fill the shop with fog. While visiting the Westech tool sho I ran
across a mister from Hench Manufacturing which claimed to eliminate
the fogging problem.
This system is similar to the others except for the fact that the
coolant tank is presurized and the coolant is fed into the air stream
under pressure. I guess that this eliminates the atomization that
occurs in the other systems. I have been using it for over 3 years
now and have never had a fog problem.
Here is a web site with some info:
http://www.mmsonline.com/articles/1097bp4.html
I found this contact info on the web:
Hench Manufacturing, Inc.
Contact Information
1510 D Ave. De La Estrella
San Clemente CA 92672
949-492-0125 (phone)
949-492-0416 (fax)
> Hi Tom,and
>
> I'll give this a shot.
>
> 1) they both work well.
> 2) Health? mister gets your lungs, flood gets your skin.
> 3) Which one makes more sense has to do with the type of machine,
> amount of metal removal. Flood is what VMC's (mostly) use, but theymore "maintennance"
> are enclosed and designed for it...
> 4) Part finish? Flood is more forgiving, IMO. But
> issues too.usage
> 5) Do you want to run a compressor for your mister? Or is your
> small enough that you can get by with a garden sprayer type setup?Snip
>
I had tried several types of mist systems and every one of them woudl
fill the shop with fog. While visiting the Westech tool sho I ran
across a mister from Hench Manufacturing which claimed to eliminate
the fogging problem.
This system is similar to the others except for the fact that the
coolant tank is presurized and the coolant is fed into the air stream
under pressure. I guess that this eliminates the atomization that
occurs in the other systems. I have been using it for over 3 years
now and have never had a fog problem.
Here is a web site with some info:
http://www.mmsonline.com/articles/1097bp4.html
I found this contact info on the web:
Hench Manufacturing, Inc.
Contact Information
1510 D Ave. De La Estrella
San Clemente CA 92672
949-492-0125 (phone)
949-492-0416 (fax)
Discussion Thread
george@f...
2001-04-20 12:11:39 UTC
orange peel on aluminum
Smoke
2001-04-20 12:49:52 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Rich D.
2001-04-20 12:51:26 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Elson
2001-04-20 14:08:50 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Anderson
2001-04-20 15:38:52 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Elson
2001-04-20 16:20:00 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Elson
2001-04-20 16:22:01 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Smoke
2001-04-20 16:47:14 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Anderson
2001-04-20 16:59:13 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Sven Peter, TAD S.A.
2001-04-20 17:10:01 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
dougrasmussen@c...
2001-04-20 17:51:04 UTC
Re: orange peel on aluminum
Donald Brock
2001-04-20 22:48:50 UTC
Re: orange peel on aluminum
Tim Goldstein
2001-04-20 23:14:03 UTC
Detailed wiring diagram for Gecko G3X0 drives
ballendo@y...
2001-04-21 02:37:56 UTC
Re: orange peel on aluminum
wanliker@a...
2001-04-21 07:37:53 UTC
Re: [CAD_CAM_EDM_DRO] Detailed wiring diagram for Gecko G3X0 drives
Tim Goldstein
2001-04-21 08:57:56 UTC
RE: [CAD_CAM_EDM_DRO] Detailed wiring diagram for Gecko G3X0 drives
Donald Brock
2001-04-21 15:55:25 UTC
Re: Detailed wiring diagram for Gecko G3X0 drives/MY thanks.
Tom Eldredge
2001-04-22 08:58:45 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Anderson
2001-04-22 11:21:29 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Elson
2001-04-22 21:12:38 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Alan Marconett KM6VV
2001-04-22 21:37:27 UTC
Re: [CAD_CAM_EDM_DRO] Detailed wiring diagram for Gecko G3X0 drives
ballendo@y...
2001-04-23 06:28:07 UTC
Re: orange peel on aluminum
Bill Griffin
2001-04-23 09:14:54 UTC
Mister system was Re: orange peel on aluminum
Doug Harrison
2001-04-23 15:37:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Detailed wiring diagram for Gecko G3X0 drives/MY thanks.
Tom Eldredge
2001-04-24 06:23:38 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum