Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Posted by
Rich D.
on 2001-04-20 12:51:26 UTC
Geo,
Light interference patterns from the small grooves left by the forward
and rearward strokes of the cutter.
Rich D.
george@... wrote:
Light interference patterns from the small grooves left by the forward
and rearward strokes of the cutter.
Rich D.
george@... wrote:
>
> I used a flycutter on a peice of 6061-t6 and got a organge peel type
> texture.
> What causes this?
>
> TIA
> Geo.
Discussion Thread
george@f...
2001-04-20 12:11:39 UTC
orange peel on aluminum
Smoke
2001-04-20 12:49:52 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Rich D.
2001-04-20 12:51:26 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Elson
2001-04-20 14:08:50 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Anderson
2001-04-20 15:38:52 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Elson
2001-04-20 16:20:00 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Elson
2001-04-20 16:22:01 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Smoke
2001-04-20 16:47:14 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Anderson
2001-04-20 16:59:13 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Sven Peter, TAD S.A.
2001-04-20 17:10:01 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
dougrasmussen@c...
2001-04-20 17:51:04 UTC
Re: orange peel on aluminum
Donald Brock
2001-04-20 22:48:50 UTC
Re: orange peel on aluminum
Tim Goldstein
2001-04-20 23:14:03 UTC
Detailed wiring diagram for Gecko G3X0 drives
ballendo@y...
2001-04-21 02:37:56 UTC
Re: orange peel on aluminum
wanliker@a...
2001-04-21 07:37:53 UTC
Re: [CAD_CAM_EDM_DRO] Detailed wiring diagram for Gecko G3X0 drives
Tim Goldstein
2001-04-21 08:57:56 UTC
RE: [CAD_CAM_EDM_DRO] Detailed wiring diagram for Gecko G3X0 drives
Donald Brock
2001-04-21 15:55:25 UTC
Re: Detailed wiring diagram for Gecko G3X0 drives/MY thanks.
Tom Eldredge
2001-04-22 08:58:45 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Anderson
2001-04-22 11:21:29 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Jon Elson
2001-04-22 21:12:38 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum
Alan Marconett KM6VV
2001-04-22 21:37:27 UTC
Re: [CAD_CAM_EDM_DRO] Detailed wiring diagram for Gecko G3X0 drives
ballendo@y...
2001-04-23 06:28:07 UTC
Re: orange peel on aluminum
Bill Griffin
2001-04-23 09:14:54 UTC
Mister system was Re: orange peel on aluminum
Doug Harrison
2001-04-23 15:37:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Detailed wiring diagram for Gecko G3X0 drives/MY thanks.
Tom Eldredge
2001-04-24 06:23:38 UTC
Re: [CAD_CAM_EDM_DRO] orange peel on aluminum