Re: [CAD_CAM_EDM_DRO] Looking for a quick change style holder

Something like that should be pretty easy to make. Just size it to fit your
machine. I made a similar dovetail holder for a custom tool post grinder I
made when I was in school.

Smoke

>Does anyone know who makes a small dovetail style tool holder?
>Something like an Aloris quick change toolpost but not as big or
>rigid. No need for it to have a quick change lever or whatever.
>Just a simple pinch bolt arrangement would suffice. I want to use
>something like this to hold some optical stuff on an XY stage.
>Speed of removal isn't as important as repeatablility.
>
>Actually all I'm looking for is a small block with a female
>dovetail which can be bolted to an arm and something with a male
>dovetail which will fit it. Like I said above, retention can be via
>something simple like a pinch bolt.
>
>Thanks,
>Drew
>
>
>--
>Drew Rogge
>drew@...
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>