Re: Looking for a quick change style holder

Drew,

Check this toolholder out:

http://www.harborfreight.com/

search for item number: 39083

-Lee

--- In CAD_CAM_EDM_DRO@y..., Drew Rogge <drew@p...> wrote:
> I figured it wouldn't be too hard but if I can find a commercial
> one somewhere it will be just that much easier. BTW, this is for
> work not play. If it was for home I would probably make one.
>
> Thanks,
> Drew
>
> Smoke wrote:
> >
> > Something like that should be pretty easy to make. Just size it
to fit your
> > machine. I made a similar dovetail holder for a custom tool post
grinder I
> > made when I was in school.
> >
> > Smoke
> >
> > >Does anyone know who makes a small dovetail style tool holder?
> > >Something like an Aloris quick change toolpost but not as big or
> > >rigid. No need for it to have a quick change lever or whatever.
> > >Just a simple pinch bolt arrangement would suffice. I want to use
> > >something like this to hold some optical stuff on an XY stage.
> > >Speed of removal isn't as important as repeatablility.
> > >
> > >Actually all I'm looking for is a small block with a female
> > >dovetail which can be bolted to an arm and something with a male
> > >dovetail which will fit it. Like I said above, retention can be
via
> > >something simple like a pinch bolt.
> > >
> > >Thanks,
> > >Drew
> > >
> > >
> > >--
> > >Drew Rogge
> > >drew@p...
>
> --
> Drew Rogge
> drew@p...