Re: [CAD_CAM_EDM_DRO] Looking for a quick change style holder

I figured it wouldn't be too hard but if I can find a commercial
one somewhere it will be just that much easier. BTW, this is for
work not play. If it was for home I would probably make one.

Thanks,
Drew

Smoke wrote:

>
> Something like that should be pretty easy to make. Just size it to fit your
> machine. I made a similar dovetail holder for a custom tool post grinder I
> made when I was in school.
>
> Smoke
>
> >Does anyone know who makes a small dovetail style tool holder?
> >Something like an Aloris quick change toolpost but not as big or
> >rigid. No need for it to have a quick change lever or whatever.
> >Just a simple pinch bolt arrangement would suffice. I want to use
> >something like this to hold some optical stuff on an XY stage.
> >Speed of removal isn't as important as repeatablility.
> >
> >Actually all I'm looking for is a small block with a female
> >dovetail which can be bolted to an arm and something with a male
> >dovetail which will fit it. Like I said above, retention can be via
> >something simple like a pinch bolt.
> >
> >Thanks,
> >Drew
> >
> >
> >--
> >Drew Rogge
> >drew@...

--
Drew Rogge
drew@...