Re: Looking for a quick change style holder

Drew,
I've got one if you need some measured specs etc.
-Lee

--- In CAD_CAM_EDM_DRO@y..., indigo_red@q... wrote:
> Drew,
>
> Check this toolholder out:
>
> http://www.harborfreight.com/
>
> search for item number: 39083
>
> -Lee
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., Drew Rogge <drew@p...> wrote:
> > I figured it wouldn't be too hard but if I can find a commercial
> > one somewhere it will be just that much easier. BTW, this is for
> > work not play. If it was for home I would probably make one.
> >
> > Thanks,
> > Drew
> >
> > Smoke wrote:
> > >
> > > Something like that should be pretty easy to make. Just size
it
> to fit your
> > > machine. I made a similar dovetail holder for a custom tool
post
> grinder I
> > > made when I was in school.
> > >
> > > Smoke
> > >
> > > >Does anyone know who makes a small dovetail style tool holder?
> > > >Something like an Aloris quick change toolpost but not as big
or
> > > >rigid. No need for it to have a quick change lever or whatever.
> > > >Just a simple pinch bolt arrangement would suffice. I want to
use
> > > >something like this to hold some optical stuff on an XY stage.
> > > >Speed of removal isn't as important as repeatablility.
> > > >
> > > >Actually all I'm looking for is a small block with a female
> > > >dovetail which can be bolted to an arm and something with a
male
> > > >dovetail which will fit it. Like I said above, retention can
be
> via
> > > >something simple like a pinch bolt.
> > > >
> > > >Thanks,
> > > >Drew
> > > >
> > > >
> > > >--
> > > >Drew Rogge
> > > >drew@p...
> >
> > --
> > Drew Rogge
> > drew@p...