Re: [CAD_CAM_EDM_DRO] DC Motors
Posted by
wanliker@a...
on 2001-04-23 16:51:32 UTC
In a message dated 4/23/01 5:32:47 PM Mountain Daylight Time,
wanliker@... writes:
<< Go to Grangers and they have several models, just be sure the amps match.
bill >>
Sorry left out the words "of controllers"
Just be sure whether your motor requires field supply, or if it is a PM
motor, and be sure controller has the same features. The better ones will
have:
Min speed,
Max speed,
IR comp, this is highly desirable, as it allows the controller to keep the
speed more constant as the load changes.
bill
wanliker@... writes:
<< Go to Grangers and they have several models, just be sure the amps match.
bill >>
Sorry left out the words "of controllers"
Just be sure whether your motor requires field supply, or if it is a PM
motor, and be sure controller has the same features. The better ones will
have:
Min speed,
Max speed,
IR comp, this is highly desirable, as it allows the controller to keep the
speed more constant as the load changes.
bill
Discussion Thread
wbhinkle@a...
2001-04-23 15:38:37 UTC
DC Motors
wanliker@a...
2001-04-23 16:32:06 UTC
Re: [CAD_CAM_EDM_DRO] DC Motors
wanliker@a...
2001-04-23 16:51:32 UTC
Re: [CAD_CAM_EDM_DRO] DC Motors
Rich D.
2001-04-23 16:55:15 UTC
Re: [CAD_CAM_EDM_DRO] DC Motors
Tom Murray
2001-04-23 20:03:09 UTC
Re: DC Motors
ballendo@y...
2001-04-24 03:53:30 UTC
Re: DC Motors
Jason Cox
2003-05-27 04:01:37 UTC
DC Motors
Jon Elson
2003-05-27 10:10:35 UTC
Re: [CAD_CAM_EDM_DRO] DC Motors
Stephan Kotzé
2003-05-27 13:21:05 UTC
RE:DC Motors