Re: [CAD_CAM_EDM_DRO] Kurt Drawbar Won't work!

Hello Joe,
Possibly not even that. The thing normally is driven by a carriage type
neumatic valve. This type of valve is given to stick frequently when it is old.
So first dismantle the valve and clean with sewing machine oil.
It is normal that after 3 weeks it will start to go on strike again.
When You get tired of this game the best way to go is a SEATALVE
generaly one 5/3 position valve or two 3/2 position valves.
I warmly recomend the FESTO MFH or MVG valves .
They are relativly expencive but these things never get stuck.
And you shurely get spare parts!! (in one machine I changed seals of an older model with the same principle for the first time
after 18 years service of a valve that was 12 years out of production.
This is now 8 years ago and the machine runs like a clock work)
Good Luck
Sven Peter

jvicars@... wrote:

> Has anyone any experience with diagnosing a problem with a Kurt Power
> Drawbar? I hook up air, push the IN and OUT buttons and nothing
> happens.
> There is only the IN/OUT button, the Impact Wrench part, and a small
> air logic module. The problem must be in one of these.
> Any help?
> Thanks
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]