CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee?

Posted by stratton@m...
on 2001-04-30 08:00:47 UTC
>
> How does the air assist on the knee work? Looking at the pedestal there is
> the air fitting entering the base at the back. at the top of the pedestal
> there is a fitting with the lubricator line and a about 3" diameter
> accordion covering going all the way to the top of the knee ball screw and
> it contains the ball screw. Poking at the accordion covering very gently all
> I can feel underneath is the ball screw. Is there an actual cylinder in this
> thing somewhere? When I replace the airline and apply air will a coaxial
> cylinder magically rise surrounding the ball screw?
>

Hmm, is there any chance the screw itself is the cylinder, or rather
the piston? I'm thinking probably not, as it would require an
unreasonably high air pressure to lift a heavy knee with the cross
section of a typical screw. It would of course leak a bit, but the
leaks would keep chips out of the nut.

Chris

--
Christopher C. Stratton, stratton@...
Instrument Maker, Horn Player & Engineer
22 Adrian Street, Somerville, MA 02143
http://www.mdc.net/~stratton
NEW PHONE NUMBER: (617) 628-1062 home, 253-2606 MIT

Discussion Thread

jeffrosselthecat@y... 2001-04-28 07:33:04 UTC jeffrosselthecat@y... 2001-04-28 07:34:41 UTC (Forgot above subject) Stepper sizing Tim Goldstein 2001-04-28 08:07:02 UTC RE: [CAD_CAM_EDM_DRO] (unknown) jeffrosselthecat@y... 2001-04-28 11:10:03 UTC Re: (unknown) mini mill size afogassa@y... 2001-04-28 20:58:34 UTC Tim Goldstein 2001-04-28 22:00:16 UTC Air assist on Series II knee? Sven Peter, TAD S.A. 2001-04-29 09:05:24 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Tim Goldstein 2001-04-29 16:27:33 UTC RE: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Brian Pitt 2001-04-29 16:53:33 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Tim Goldstein 2001-04-29 17:09:52 UTC RE: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Sven Peter, TAD S.A. 2001-04-30 05:35:58 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee? stratton@m... 2001-04-30 08:00:47 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Tim Goldstein 2001-04-30 08:34:38 UTC RE: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Joe Vicars 2001-04-30 08:37:33 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Tim Goldstein 2001-04-30 09:05:40 UTC RE: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Joe Vicars 2001-04-30 09:32:47 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee? indigo_red@q... 2001-04-30 09:34:53 UTC Re: Air assist on Series II knee? Jon Elson 2001-05-01 15:39:34 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Ian Wright 2001-05-02 01:10:17 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee? Keith Rumley 2001-05-04 08:01:15 UTC Re: [CAD_CAM_EDM_DRO] Air assist on Series II knee?