CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] way covers

Posted by Smoke
on 2001-04-30 21:23:49 UTC
Cancel my last question about the flat springs. just went to the hennig
site listed below and they have them. The items are know as telescoping
(steel) springs.

Gortite has some round bellows for covering ball screws and nuts that might
work too.

Thanks for the tip Brian!

Smoke


>
>DIY bellows way covers (sort of)
>http://www.cyberbeach.net/~dbardell/bellows.html
>or try
>http://www.gortite.com/bellow.html
>http://www.hennig-inc.com/Bellows.htm
>
>Brian
:

Discussion Thread

Joe Vicars 2001-04-30 09:47:22 UTC way covers Brian Pitt 2001-04-30 10:47:40 UTC Re: [CAD_CAM_EDM_DRO] way covers Smoke 2001-04-30 20:43:44 UTC Re: [CAD_CAM_EDM_DRO] way covers Smoke 2001-04-30 21:23:49 UTC Re: [CAD_CAM_EDM_DRO] way covers JanRwl@A... 2001-04-30 22:20:08 UTC Re: [CAD_CAM_EDM_DRO] way covers Jon Elson 2001-05-01 16:44:12 UTC Re: [CAD_CAM_EDM_DRO] way covers Smoke 2001-05-01 23:19:42 UTC Re: [CAD_CAM_EDM_DRO] way covers ballendo@y... 2001-05-02 08:39:48 UTC Re: way covers Brian Pitt 2001-05-02 12:08:21 UTC Re: [CAD_CAM_EDM_DRO] way covers Alan Marconett KM6VV 2001-05-02 14:06:28 UTC Re: [CAD_CAM_EDM_DRO] way covers Jon Elson 2001-05-02 14:35:59 UTC Re: [CAD_CAM_EDM_DRO] way covers Joe Vicars 2001-05-02 15:29:57 UTC Re: [CAD_CAM_EDM_DRO] way covers Brian Pitt 2001-05-03 11:44:00 UTC Re: [CAD_CAM_EDM_DRO] way covers Graeme Murray 2001-05-03 13:41:41 UTC Re: [CAD_CAM_EDM_DRO] way covers Alan Marconett KM6VV 2001-05-03 14:56:16 UTC Re: [CAD_CAM_EDM_DRO] way covers Alan Marconett KM6VV 2001-05-03 15:20:53 UTC Re: [CAD_CAM_EDM_DRO] way covers Tom Eldredge 2001-05-04 10:43:49 UTC Re: [CAD_CAM_EDM_DRO] way covers designer987@y... 2001-11-06 18:04:06 UTC Re: way covers Garry & Maxine Foster 2003-01-12 14:06:54 UTC HobbyCNC