Re: way covers
Posted by
ballendo@y...
on 2001-05-02 08:39:48 UTC
Smoke,List,
You might start with the dryer hose idea mentioned earlier
and "rubberize" it with the latex, or silicone. EAA'ers use silicone
on fiberglas cloth to make flexible baffles for firewall forward
aircraft installations. Similar environment.
Hope this helps.
Ballendo
P.S. Glued fabric "washers" will build a round bellows pretty quickly.
be sure the material can resist the chemicals of the environment, as
well with the glue.
You might start with the dryer hose idea mentioned earlier
and "rubberize" it with the latex, or silicone. EAA'ers use silicone
on fiberglas cloth to make flexible baffles for firewall forward
aircraft installations. Similar environment.
Hope this helps.
Ballendo
P.S. Glued fabric "washers" will build a round bellows pretty quickly.
be sure the material can resist the chemicals of the environment, as
well with the glue.
--- In CAD_CAM_EDM_DRO@y..., "Smoke" <gordonr@r...> wrote:
> Wonder if there's an easy/cheap way to make a round bellows from
RTV, latex
> rubber or whatever?
>
> Anyone have any ideas?
>
> Smoke
Discussion Thread
Joe Vicars
2001-04-30 09:47:22 UTC
way covers
Brian Pitt
2001-04-30 10:47:40 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Smoke
2001-04-30 20:43:44 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Smoke
2001-04-30 21:23:49 UTC
Re: [CAD_CAM_EDM_DRO] way covers
JanRwl@A...
2001-04-30 22:20:08 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Jon Elson
2001-05-01 16:44:12 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Smoke
2001-05-01 23:19:42 UTC
Re: [CAD_CAM_EDM_DRO] way covers
ballendo@y...
2001-05-02 08:39:48 UTC
Re: way covers
Brian Pitt
2001-05-02 12:08:21 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Alan Marconett KM6VV
2001-05-02 14:06:28 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Jon Elson
2001-05-02 14:35:59 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Joe Vicars
2001-05-02 15:29:57 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Brian Pitt
2001-05-03 11:44:00 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Graeme Murray
2001-05-03 13:41:41 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Alan Marconett KM6VV
2001-05-03 14:56:16 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Alan Marconett KM6VV
2001-05-03 15:20:53 UTC
Re: [CAD_CAM_EDM_DRO] way covers
Tom Eldredge
2001-05-04 10:43:49 UTC
Re: [CAD_CAM_EDM_DRO] way covers
designer987@y...
2001-11-06 18:04:06 UTC
Re: way covers
Garry & Maxine Foster
2003-01-12 14:06:54 UTC
HobbyCNC