CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Automatic boring head?

Posted by diazden
on 2001-05-03 08:06:57 UTC
Hi ;
also model engineering magazine (uk) run a project like that a few years back
I got mine after fixing a scrapped one ( someone started the machine without checking
for clearence, and broke the bottom part where the tool fits ,I made a new part and got my
boring head
regards
mariano


Smoke wrote:

> I'm not really sure, but a vaguely remember seeing an article (or perhaps an
> ad?) in the Home Shop Machinist about building your own quite some years
> ago.
>
> Smoke
>
> >I just used the one at work last week We had a saw arbour wash out
> >the Cerclip groove I took out the Auto Boring head and recut the
> >groove after I welded it up .I heard that there is a kit out there
> >some where .Where you can make your own I will find out and post it
> >unless some elseknows where to find it ..
> >
> >
> >John
> >
> >
> >
> >--- In CAD_CAM_EDM_DRO@y..., cadman@p... wrote:
> >> I have used one before, as well as a manual one that I made. The
> >only
> >> difference is, the automatic one there is a ring that you can hold
> >> while it's turning that will step the boaring bar over by some
> >> increment (.001). All you have to do to move the boaring bar over
> >by
> >> .005 is to count 5 clicks when you grab the ring. Of course the
> >> boaring head is turning very slow so it's not unsafe to do this :)
> >>
> >> With the manual one, you have to stop the machine and turn the
> >screw
> >> with an allen head wrench to move the boaring bar over.
> >>
> >> CADMAN
> >>
> >>
> >> --- In CAD_CAM_EDM_DRO@y..., Tim Goldstein <timg@k...> wrote:
> >> > OK, I have seen this item listed in catalogs and still don't
> >> understand why
> >> > I would want one, when it would be used, if it can work like a
> >> standard
> >> > boring head, or how I would make it work automatically.
> >> >
> >> > Can anyone help reduce my ignorance?
> >> >
> >> > Tim
> >> > [Denver, CO]
> >
> >
> >Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> >Addresses:
> >Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> >Moderator: jmelson@... timg@... [Moderator]
> >URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >bill,
> >List Manager
> >
> >FAQ: http://www.ktmarketing.com/faq.html
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

Tim Goldstein 2001-05-02 09:20:06 UTC Automatic boring head? Joe Vicars 2001-05-02 11:54:15 UTC Re: [CAD_CAM_EDM_DRO] Automatic boring head? jmelson 2001-05-02 12:02:32 UTC Re: [CAD_CAM_EDM_DRO] Automatic boring head? Hugh Currin 2001-05-02 12:42:01 UTC Re: Automatic boring head? cadman@p... 2001-05-02 16:33:29 UTC Re: Automatic boring head? hexagon@o... 2001-05-02 16:48:31 UTC Re: Automatic boring head? hexagon@o... 2001-05-02 16:54:20 UTC Re: Automatic boring head? ballendo@y... 2001-05-02 17:59:37 UTC Re: Automatic boring head? ballendo@y... 2001-05-02 18:11:54 UTC Re: Automatic boring head? Smoke 2001-05-02 18:21:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Automatic boring head? ballendo@y... 2001-05-02 19:33:39 UTC Re: Automatic boring head? marble_h@y... 2001-05-02 20:35:33 UTC Re: Automatic boring head? Smoke 2001-05-02 21:45:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Automatic boring head? Smoke 2001-05-02 21:47:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Automatic boring head? Matt Shaver 2001-05-02 23:17:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Automatic boring head? ballendo@y... 2001-05-02 23:21:49 UTC Re: Automatic boring head? diazden 2001-05-03 08:06:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Automatic boring head? hexagon@o... 2001-05-04 18:12:48 UTC Re: Automatic boring head? wanliker@a... 2001-05-04 18:21:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Automatic boring head? Doug Harrison 2001-05-04 19:19:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Automatic boring head?