Re: [CAD_CAM_EDM_DRO] Making bellows

How about that plastic that's available for covering tool handles?
Make the pattern from plaster and dip it in the heated plastic.
That stuff is available from MSC and many other places.

Smoke

>Yes, this is how medical catheters were made. The problem, of course,
>is that oils turn natural Latex into a gummy mess. There might be some
>silicone product that can be dip molded like latex, but I don't know of

one.

>

>Jon
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>