CAD CAM EDM DRO - Yahoo Group Archive

BDI feedback required.

Posted by Paul
on 2001-05-10 14:33:12 UTC
Hi All

I'm compiling a list of BDI compatable hardware and need a little bit of help
from people who have the BDI installed. If you could run the following commands
from a console and email me paul.corner@... off list with the results, it
would be appreciated.

cat /proc/cpuinfo
cat /proc/pci | grep control
cat /proc/pci | grep bridge
cat /proc/meminfo | grep MemTotal
cat /proc/partitions

From the first command, just need the model name and cpu MHz. Some info about
the motherboard would also be helpfull - i.e. Make and chipset

For those unfortunate to have problems with the CD a note about the
Processor/chipset/graphics card would also be usefull.

Thanks in advance, Paul.

Discussion Thread

Paul 2001-05-10 14:33:12 UTC BDI feedback required. Larry Edington 2001-05-10 16:10:26 UTC Re: [CAD_CAM_EDM_DRO] BDI feedback required. Paul 2001-05-11 11:40:57 UTC Re: [CAD_CAM_EDM_DRO] BDI feedback required. Larry Edington 2001-05-11 12:44:37 UTC Re: [CAD_CAM_EDM_DRO] BDI feedback required. Ian Wright 2001-05-12 05:27:45 UTC Re: [CAD_CAM_EDM_DRO] BDI feedback required. Sven Peter, TAD S.A. 2001-05-12 05:34:12 UTC Re: [CAD_CAM_EDM_DRO] BDI feedback required. Chris Paine 2001-05-13 12:47:23 UTC Re: [CAD_CAM_EDM_DRO] BDI feedback required. Marty Escarcega 2001-05-13 12:49:08 UTC Re: [CAD_CAM_EDM_DRO] BDI feedback required. Ray 2001-05-14 05:18:07 UTC Re: Re: BDI feedback required.