Re: [CAD_CAM_EDM_DRO] BDI feedback required.
Posted by
Larry Edington
on 2001-05-10 16:10:26 UTC
Compaq Deskpro 590. Install failed on the switch to graphics mode.
Installed a different video card and that fixed it.
later,
Larry E.
Installed a different video card and that fixed it.
later,
Larry E.
----- Original Message -----
From: "Paul" <Paul.Corner@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, May 10, 2001 3:37 PM
Subject: [CAD_CAM_EDM_DRO] BDI feedback required.
> For those unfortunate to have problems with the CD a note about the
> Processor/chipset/graphics card would also be usefull.
Discussion Thread
Paul
2001-05-10 14:33:12 UTC
BDI feedback required.
Larry Edington
2001-05-10 16:10:26 UTC
Re: [CAD_CAM_EDM_DRO] BDI feedback required.
Paul
2001-05-11 11:40:57 UTC
Re: [CAD_CAM_EDM_DRO] BDI feedback required.
Larry Edington
2001-05-11 12:44:37 UTC
Re: [CAD_CAM_EDM_DRO] BDI feedback required.
Ian Wright
2001-05-12 05:27:45 UTC
Re: [CAD_CAM_EDM_DRO] BDI feedback required.
Sven Peter, TAD S.A.
2001-05-12 05:34:12 UTC
Re: [CAD_CAM_EDM_DRO] BDI feedback required.
Chris Paine
2001-05-13 12:47:23 UTC
Re: [CAD_CAM_EDM_DRO] BDI feedback required.
Marty Escarcega
2001-05-13 12:49:08 UTC
Re: [CAD_CAM_EDM_DRO] BDI feedback required.
Ray
2001-05-14 05:18:07 UTC
Re: Re: BDI feedback required.