Re: [CAD_CAM_EDM_DRO] BDI feedback required.

My problem certainly wasn't AGP related as the Deskpro 90 only has PCI and
ISA slots. I put in an ATI Rage Pro PCI ( first card I grabbed ) and it
worked fine.

later,
Larry E.

----- Original Message -----
From: "Paul" <Paul.Corner@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, May 11, 2001 12:29 PM
Subject: Re: [CAD_CAM_EDM_DRO] BDI feedback required.


>
> Hi Larry
>
> Do you know what the original and replacement video cards are ?
> There seems to be one or two people with the same problem, and I'm
wondering
> if they are AGP related.
>
> Regards, Paul.
>
>
> On Fri, 11 May 2001, Larry Edington wrote:
> > Compaq Deskpro 590. Install failed on the switch to graphics mode.
> > Installed a different video card and that fixed it.
> >
> > later,
> > Larry E.
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>