Re: [CAD_CAM_EDM_DRO] Sheet metal Cad

You should be able to do that pretty easily with Rhino

Smoke

>Gentlemen,
>
>Does anyone know of any Cad package that would allow one to layout sheet
>metal patterns for cones, and various shapes used in making things like the
>"cyclones" used in wood working shops? I would need to be able to "unfold"
>the pattern to a flat sheet to allow the plasma cutting of the various

parts

>necessary to make sheet metal components?
>
>Tom Eldredge
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>