Re: Sanyo Motor

--- In CAD_CAM_EDM_DRO@y..., "Carol & Jerry Jankura"
<jerry.jankura@s...> wrote:

> It's a size 23 mount, approximately 2 1/2 inches deep.
>
> -- Carol & Jerry Jankura

That's a bit long for a single-stack, but too
short for a double. hmmm...there -are- some
'stack and a half' motors made in size-23.

Or it could just be a single-stack.

Probably between 45-65 oz-in; unless it's pretty
recent, and exotic. The PowerMotors we sell
are 100 oz-in -per stack-; but that's pretty
unusual.

Sure it'll work on a Sherline. Heck, there are
lots of people making parts every day with
50 oz-in single-stacks. I wouldn't expect
any great speed out of it though.

Unless you run it with a high-voltage drive
of course. But size-23's are pretty easy to
overheat and burn up on HV drives. Not much
thermal mass there...

Richard