CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Sanyo Motor

Posted by RC
on 2001-05-25 16:16:52 UTC
Hi my name is Russ and I'm new to the group, seems to be a great source for
cnc information! As far as stepper motors go, I can tell you that "phase
resistance" is very important! Ok, I believe this is the formula for phase
resistance, volts / amps = resistance per phase. The higher the resistance,
the more heat is generated, less efficient they are, 4 ohms is a bit high,
the lower the better .Also a 8 wire stepper is better, because of different
wiring options.

Thanks,
Russ

Discussion Thread

Carol & Jerry Jankura 2001-05-25 15:53:47 UTC Sanyo Motor RC 2001-05-25 16:16:52 UTC Re: [CAD_CAM_EDM_DRO] Sanyo Motor admin@a... 2001-05-25 16:47:11 UTC Re: Sanyo Motor admin@a... 2001-05-25 16:55:05 UTC Re: Sanyo Motor Carol & Jerry Jankura 2001-05-25 16:57:25 UTC RE: [CAD_CAM_EDM_DRO] Re: Sanyo Motor Carol & Jerry Jankura 2001-05-25 17:04:27 UTC RE: [CAD_CAM_EDM_DRO] Re: Sanyo Motor Chris Stratton 2001-05-25 17:21:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Sanyo Motor admin@a... 2001-05-25 17:35:48 UTC Re: Sanyo Motor alenz@c... 2001-05-25 22:41:20 UTC Re: Sanyo Motor RC 2001-05-26 04:05:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Sanyo Motor